742 베타 펌웨어가 올라왔네요. 베타이기 때문에, 유 경험자 분들만 받아서 테스트할 것을 권고하고 있습니다.
무선 동글 사용자는 펌업시 무선 사용이 안될수 있으니 USB 연결 사용자만 하라고 하네요.
아래 휠에서 사용가능하며, 변경 부분 입니다.
Firmware 742BETA runs on the follwing wheels:
•CSR
•CSR Elite
•911 GT3 RS V2
•911 Turbo S (무선동글 지원안됨, 유선사용자만 해당)
•911 GT2
변경 부분
•ACL added to all Wheels
•500 Hz update rate
-> 리프레시 레이트 헤르츠가 다소 올라간듯 하네요 -> 보다 빨라진 반응?
•Allows use of SDK to show telemetry data on Tuning display
-> 개발자 SDK 를 통해 튜닝 디스플레이를 사용가능하게 해주는듯
•Improved force feedback algorithms
-> 피드백 알고리즘이 개선됐다고 합니다. 중요한 부분일듯
•Improved FF sensitivity around center position
-> 휠 센터 포지션시 피드백 감도 개선
•Improved center spring
-> 중앙 복귀 속도 개선 (스프링이라고 표현되어있어서 모호하네요)
•DPR and SPR calculation changed
-> 댐퍼와 스프링 값 계산 방식 변경
•Improved navigation in Tuning menu (keep pressing the up or down button)
-> 튜닝메뉴 이동 방법 개선
•Default Sensitivity = OFF (900°)
•Changed button mapping to ensure compatibility to older games
-> 오래된 게임에 대한 호환성(버튼 매핑부분) 변경
•New initialisation sequence to auto detect minimum ff level required for each individual wheel
-> 각 휠 마다 최초시점의 피드백 레벨 자동 측정 (???)
•fixed issue with hanging ff signals
•Changed button combo for center calibration. Please follow manual of updater (included)
-> 센터 설정 방식 변경, 기존에 누르던 여러개 버튼이 변경된듯
정도인듯 합니다.
유경험자 분들도 포함된 펌업 가이드를 충실히 꼼꼼히 읽어보시고 수행하시기 바랍니다.
무경험자 분들은 유경험자 분들의 업데이트 결과 후기가 올라오기 시작하면 사용하심이 정신건강에 이로울듯 합니다. ^^;;
베타 버젼의 펌웨어 업데이트시 생기는 문제는 AS가 어려우니 이점 양지 하시고 진행하시고요 ^^
여러가지 변경되어서 날잡고 시도해봐야겠네요.
The internal testing was succesful so far so we are now looking for external beta testers for our new firmware. These versions are clearly BETA versions so please install them only if you are an experienced user.
Firmware 742BETA runs on the follwing wheels:
•CSR
•CSR Elite
•911 GT3 RS V2
•911 Turbo S
•911 GT2
IMPORTANT: If you want to use the RF dongle for your 911 GT2 or Turbo S wheel, please do not update, as with this version you can only use the USB connection afterwards.
There is no firmware update planned for the 911 Turbo (not S), 911 Carrera and 911 GT3RS V1.
We made a lot of changes and these are some of them:
•ACL added to all Wheels
•500 Hz update rate
•Allows use of SDK to show telemetry data on Tuning display
•Improved force feedback algorithms
•Improved FF sensitivity around center position
•Improved center spring
•DPR and SPR calculation changed
•Improved navigation in Tuning menu (keep pressing the up or down button)
•Default Sensitivity = OFF (900°)
•Changed button mapping to ensure compatibility to older games
•New initialisation sequence to auto detect minimum ff level required for each individual wheel
•fixed issue with hanging ff signals
•Changed button combo for center calibration. Please follow manual of updater (included)
If you use this on PC you also need to isntall the latest BETA version of our driver. Below you find version 125 for 32 and 64 bit.
It also comes with a lot of changes and we fixed a lot of issues we had in the force feedback core of the driver.
Like with the firmware, this version of the driver is only for eperienced users yet and not for the general public. Please report all issues you find right here so we can work on them before releasing the final versions.
드라이버 : https://www.yousendit.com/dl?phi_action=app/orchestrateDownload&rurl=https%253A%252F%252Fwww.yousendit.com%252Ftransfer.php%253Faction%253Dbatch_download%2526send_id%253D1554773425%2526email%253D9e7ead5e8a6cbb413361b1f8a08530ac&s=19104&cid=tx-02002207350200000000
펌웨어 : https://www.yousendit.com/dl?phi_action=app/orchestrateDownload&rurl=http%253A%252F%252Fwww.yousendit.com%252Ftransfer.php%253Faction%253Dbatch_download%2526batch_id%253DQlVnK3BCZEszMW01eDhUQw
펌웨어 가이드 (jin0424님 구버젼, 참고용) : http://gran-turismo.co.kr/bbs/data/gaminggear/gtk_gaminggear_ksm0424_1325840926_2.pdf
펌웨어 가이드는 다운로드 받으시는 펌웨어 압축파일내에도 포함되어 있으니 필히 사전에 정독하시기 바랍니다.
부작용: 먼가 뜻대로 안될시 멘붕이 심하게옴 ㅋㅋㅋ